Code CR3500 - Manual (Page 17)

C004387_07_CR3500_ User_Manual - 11 Save Settings
1.8.3 - PS/2 Cable Installation Guide
1. Power off the computer. If you disconnect the computer’s keyboard while it is powered on, your computer will lock up.
2. Attach the the PS/2 cable to the CR3500.
3. If you have a cabled keyboard, detach the keyboard cable from the computer and connect that same connector to the female
connection on the CR3500 PS/2 cable (Figure 1.16).
4. Now connect the male CR3500 PS/2 connector into the keyboard port on the computer (Figure 1.17).
5. Power on the computer. The CR3500 is powered by the PS/2 port and does not require a power supply.
6. Once properly connected, the CR3500 will power on and beep.
Code does not guarantee compatibility with all
models of computers.
Figure 1.16 Figure 1.17
Save Settings PS/2 Factory Reset