Comtech EF Data CiM-25 - Manual (Page 23)

CiM-25 Quick Start Guide Rev. 0
Quick Start Procedure CD/CIM25QSG.IOM
13
4 Extract the files to the temporary folder. At least three files should be extracted, including the
following:
a *.exe - The uploader
excutable program to
apply the flash
firmware data file.
b *.hlp - The help file
used by the the
uploader program.
c *.ccc - The flash
firmware data file.
Only one of this type.
5 Connect the PC to the device to be reflashed. Refer to Figure 1, Null Cable Diagram.
6 Reflash the device as follows:
a From the PC, run the uploader program that was extracted in step 4.
b Follow the on-screen directions to apply the correct data file and perform the reflash
process.
If you experience problems or have any questions, please contact Customer Support at
Comtech EF Data.