Comtech EF Data CIC-35 LVDS to ASI - Manual (Page 14)

CIC-35 LVDS to ASI Interface Converter Revision 0
MN/CIC35.IOM
5
Chapter 3. OPERATION
After applying power to the modem, make the following configuration changes to the
modem so that it will operate with the CIC-35.
• Program the transmit and receive data between 1 and 20 Mbps. Both
directions must use the same rate.
• Set the data interface type to LVDS. The modem operates in this electrical
format while the converter translates between LVDS and ASI.
• Set the transmit clocking to EXT. The Phase-Locked-Loop in the interface
converter recovers the byte clock and data on the transmit ASI signal and
reformats this to serial data and clock using LVDS format.