Comtech EF Data CMR-5930 Manual - Manual (Page 48)

CMR-5930 Digicast Media Router PID Filter ASI Revision A
Device Management via User Interfaces MN/PIDFILDC.IOM
4.3.8 Unicast Routing Configuration Menu
Figure 4-34. Unicast Routing Configuration Menu
4.4 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability to use
Telnet. To use Telnet on a Microsoft Windows
®
product, click , then .
The Run dialog box is shown in Figure 4-35. In the Open: text window, enter “telnet
xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of the CMR-5930. If the port
number has been modified from the
standard 23 via the Terminal Interface, then the port
number must be appended with a colon to the IP address.
Figure 4-35. Starting Telnet Session
The user will be prompted to enter the user name and password to gain access to the
telnet interface.
NOTE
The default username is
comtech and the default password is
comtech, both of which are case sensitive.
4-24