Comtech EF Data CMR-5940 Manual - Manual (Page 30)

CMR-5940 Digicast Media Router PID Filter RS-422 Revision A
Device Management via User Interfaces MN/PIDFILDC4.IOM
•
100BaseT Full Duplex (FDX) - fixes the Ethernet configuration to
100BaseT Full Duplex
Login Required
A user name and password are required to make any changes to the CMR-5940
configuration.
4.2.4 Egress Configuration
Figure 4-6. Egress Configuration page
The Egress Configuration page addresses the CMR-5940’s configuration for the RS-422
egress interface, and has following configurable parameters:
Framing Mode
Selects whether the RS-422 operates with either 188-byte or 204-byte packets.
Clock Select
Selects clock as Internal (generated by the CMR-5940) or External (generated
by the connected device).
Clock Rate
Sets the bit rate of the RS-422 Output interface in Mbps.
Login Required
A user name and password are required to make any changes to the CMR-5940
configuration.
4-6