Roof mount – Comtech EF Data MIDAS Site Survey Report User Manual
Page 29
Site Survey Report, Operator’s Guide, Rev.1
Antenna 4-9
R
R
o
o
o
o
f
f
M
M
o
o
u
u
n
n
t
t
1.....................................................................................................................Is sufficient roof area
available for antenna mount, staging and installation areas (see manufacturer’s
specification for minimum required space)?.........................................Yes ____ No ____
Explanation:
2. Is there an indication that the antenna (at high winds) could overload the roof?
Yes ____ No ____
If Yes, the Customer must obtain the services of a Structural Engineer to
provide a detailed analysis for roof mount requirements. This analysis shall be
based on, but not limited to, the foundation specification of the antenna and the
structural drawings of the roof.
Explanation:
3. Type of Roof:
a) Flat:
Made of
b) Peak:
Made of
c) Slope Angle: Ridge above Ground:
(feet/meters)
d) Roof Height above Ground
(feet/meters)