Comtech EF Data CRS-100 - Manual (Page 33)

CRS-100 1:1 Redundancy Switch Revision 2
Operation MN/CRS100.IOM
MN/CRS100.IOM 6–3
6.1.3 (CONFIG) MASK (Alarm mask)
ALARM MASK: AGC Eb/No
RX-AIS BUF-SLIP TX-AIS
The user is prompted to select AGC, Eb/No, RX-AIS, BUF-SLIP, or TX-AIS, using the
[
←] [→] arrow keys, then to press [ENTER].
Following the selection of the alarm to be masked, the User is then presented with a sub-
menu, where the choice between ‘ACTIVE’ and ‘MASKED’ is made.
IMPORTANT
Comtech EF Data recommends that for most applications the
CRS-100 should be configured to switch on Unit faults only.
The system, now configured, is ready to be put into service.