ConnectGear GP-10P User Manual
Page 48
User's Manual
the queue service, or press Enter to accept the default.
16.
Repeatedly press Escape to exit the PCONSOLE program.
17.
You must load NetWare print server on the NetWare file
server so that the PrintSir configured as a remote printer can
connect to that print server and service the print jobs. To load
t h e N e t W a r e p r i n t s e r v e r , t y p e “ L O A D P S E R V E R . N L M
PrintServer” command at the system console of the NetWare
file server, where PrintServer is the print server name newly
created by the PCONSOLE program.
To configure the PrintSir as a NetWare remote printer, perform the
following steps:
1 .
F r o m a w o r k s t a t i o n , l o g i n t o y o u r N e t W a r e s e r v e r a s
SUPERVISOR.
2 .
R u n t h e P S E T U P p r o g r a m i n c l u d e d o n t h e CD- ROM . ( ex .
e:\dosutil\psetup.exe)
3.
Select your new PrintSir from the list provided.