Contemporary Control Systems BAScontrol20 User Manual - Manual (Page 25)

TD100700-0MB
25
Figure 13 displays the Main Page that appears after you first login to the BASC20.
This page displays channel data in five columns:

Universal Inputs (Channels UI1–UI8)

Binary Inputs
(Channels BI1–BI4)

Analog Outputs (Channels AO1–AO4)

Binary Outputs
(Channels BO1–BO4)

Virtual Points
(Channels VT1–VT8)
Each of the 28 channels has three features:

title link
— If clicked, it displays a configuration screen (see
Figure 18 ).

data field*
— You can read a value or enter one if forced (see Section
5.1.10 ).

checkbox* — If checked, you can force the channel value (see Section
5.1.10 ).
* You need to check the box before making a change.
Figure 13 — Main Page
Six buttons occupy the bottom of the Main Page. They function as follows:

System Configuration described in Section 5.1.4

System Status described in Section 5.1.5

Set Time described in Section 5.1.6

Web Components described in Section 5.1.7

Restart Controller described in Section 5.1.8

Auto Refresh (On/Off) described in Section 5.1.9
Checkboxes Enable Forcing