Denon DRA-F100 - Manual (Page 16)

16
ENGLISH
POWER
SLEEP
EDIT RANDOM REPEAT
RESET REC / MUTE
TIME SIDE A/B
PROGRAM CANCEL DIRECT FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET MEMO +10
8 9
8 9
2
2
1
2 1
6 7
6 7
0 1
DECK
CD
MD
TUNER
Play button Stop button
Pause button
Interrupting playback temporarily
Press the pause button ( 3 ).
3 The “ 3 ” mark appears on the display, and
playback stops at the point where the button
was pressed.
Resuming playback
Press the play button ( 1 ).
The “ 3 ” mark turns off on the display, and
playback resumes from the
point where the pause button (
3 ) was
pressed. R
Stopping playback
Press the stop button ( 2 ).
R 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
• When a disc is loaded, “ ” is displayed on the
display for several seconds while the data on the
number of tracks and total playing time is being read
from the innermost side of the disc, after which the
number of tracks and total playing time appear.
• If no disc is loaded, if the disc is upside down, or if the
data cannot be read properly due to scratches or dirt,
the display reads as shown below and the disc will not
play.
NOTES:
Various Playback Functions
In addition the regular playback, the DCD-F100 also offers the following playback functions:
q Playing a specific track ………………………………………………………………………………………… Direct Search
(Using the remote control unit)
Example: Playing the 8th track
POWER
SLEEP
EDIT RANDOM REPEAT
RESET REC / MUTE
TIME SIDE A/B
PROGRAM CANCEL DIRECT FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET MEMO +10
8 9
8 9
2
2
1
2 1
6 7
6 7
0 1
DECK
CD
MD
TUNER Direct button
REPEAT button
Play button (1)
Play button (1)
8
(auto search button)
9
(auto search button)
“8”
q Press the DIRECT button.
w Press the button corresponding to the number of the
track 8. “8” appears on the track number display and
playback of track number 8 begins.
• When the end of the track is reached, playback continues
on the next track.
• To specify a track number of 11 or greater, say track 15,
press then , and to specify a track number of 20
or greater, say track 23, press , then .
To play track 20, press then . 10 +10
3 +10 +10
5 +10
w Playing a single track repeatedly …………………………………………………………………… Single-track Repeat
(Using the remote control unit)
POWER
SLEEP
EDIT RANDOM REPEAT
RESET REC / MUTE
TIME SIDE A/B
PROGRAM CANCEL DIRECT FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET MEMO +10
8 9
8 9
2
2
1
2 1
6 7
6 7
0 1
DECK
CD
MD
TUNER
q When the REPEAT button is pressed once, REPEAT
appears on the display and the single-track repeat
mode is set.
w Use the 8 and 9 buttons to select the track to be
repeated.
e Press the play button ( 1 ) to start playback.
• When the end of the specified track is reached, playback
starts over from the beginning of that track.
• The single-track repeat mode can also be set by pressing
the REPEAT button once during playback.
• To cancel the single-track repeat mode, press the REPEAT
button repeatedly until the “REPEAT” indicator turns off.
ONE
REPEAT button
e Playing all the tracks repeatedly ………………………………………………………………………… All-track Repeat
(Using the remote control unit)
q When the REPEAT button is pressed twice, REPEAT
appears on the display and the all-track repeat
mode is set.
w Press the play button ( 1 ) to start playback.
• The all-track repeat mode can also be set by pressing the
REPEAT button twice during playback.
• To cancel the all-track repeat mode, press the REPEAT
button to turn the “REPEAT” indicator off.
• If the REPEAT button is pressed during programmed
playback, the tracks are played repeatedly in the
programmed order.
ALL
ON / STANDBY
OPEN/CLOSE
PERSONAL COMPONENT SYSTEM / COMPACT DISC PLAYER DCD-F100
/ /
3
B
CD player (DCD-F100)