Assembly, Machine specifications, Tools required – Cybex 18020 Bravo Pull User Manual
Page 10: Environment and storage
10
Cybex 18020 Bravo Pull Owner’s Manual
Assembly
Machine Specifications
Total Weight and Size
Weight
Machine Dimensions at Rest
Machine Dimensions at Use
758 Lbs
50.12” W x 45.46” L x 90.70” H
50.12” W x 45.46” L x 90.70” H
344 Kg
127.30 cm W x 115.47 cm L x 230.38 H 127.30 cm W x 115.47 cm L x 230.38 H
The dimensions stated in the installation instructions are the recommended minimum dimensions as
set forth by the manufacturer. The actual area for access and passage shall be the responsibility of
the facility and should take into account any required local codes or regulations.
Tools Required
•
9/16” Wrench
•
7/32” Allen wrench
•
3/4” Socket or wrench
•
Hammer
•
3/16” Pin punch
Environment and Storage
Static Electricity
To reduce static electricity increase the humidity.
Humidity
The unit is designed to function normally in an environment with a relative humidity range of 30% to
75%. The unit can be shipped and stored in an environment with a relative humidity range of 10% to
90%.
Temperature
The unit is designed to function normally in an environment with an ambient temperature range of
50° F (10° C) to 104° F (40° C). The unit can be shipped and stored in an environment with a relative
humidity range of 10% to 90%.
Do not install, use, or store the unit in an area of high humidity, such as near a steam room, sauna,
indoor pool or outdoors. Extensive exposure to water vapor, chlorine and/or bromine could adversely
affect the equipment.