Dukane AIRSLATE AS2 - Manual (Page 17)

Dukane Audio Visual Products • 800-676-2485 • AirSlate AS2 070016 Page 15
Section 5 - Adjusting the Slate
To control the slate settings and the assign functions for the hot keys, open the slate control menu by “Right Clicking”
on the slate icon in the lower right tray. This tray is located next to the clock.
To access all the slate functions the slate should be ON. If you cannot find the Icon, the slate software may not be
loaded or the icon may be turned OFF. Start the slate and the icon should appear. If not click START/ RUN and enter
“atwtusb” click on OK and the icon should appear.
Then “Right Click” the icon to get the menu for the slate
ICON:
ABOUT: Tells the software, driver and the Firmware versions.
SHOW: Permits setting the 12 HOT KEYS ( Macro keys )
To setup a profile for the Macro Keys
1. Click “New” and then Name the profile in the box to the left.
2. If you want to modify a profile select that profile from the dropdown list.
3. If you want to delete a profile select it and then click “Delete”.