Cybex 12220 VR3 Cable Column - Manual (Page 13)

Cybex Owner’s Manual
13
Install weight plate decals
1. Peel off back side of decal making sure that the decals remain attached to the front sticker.
Front
Back
2. Insert a guide pin through each hole of the template. A guide pin can be anything that fits
through the weight stack hole, such as a weight stack selector pin.
3. Align decal and rub it onto weight plates.
4. Remove front side, leaving decals adhering to weight plates.
9
16
15
14
13
12
11
10
17
20
19
18
1
8
7
6
5
4
3
2
Guide Rod
Weight Stack
Weight
Plate Decals
Verify proper operation