Daktronics DF-4000 - Manual (Page 41)

Gas Price 5-15
LCD Screen Action
DIM level xx
0=dim
63=bright
DIMming mode
automatic
Dim Level
This is the intensity level of the display; 0 is the
dimmest setting, and 63 is the brightest setting.
Dimming Mode
This is the current mode of dimming used by the
display.
Automatic Dimming – The light sensor controls
dimming.
Manual Dimming – The DM 100 console is used to
enter all display dimming information.
Set Time
This allows you to set the time and date with the DM 100.
LCD Screen Action
SET TIME–
12HR
HH:MM AM
↓
HH – Current hours value
MM – Current minutes value
AM – Current AM/PM setting (not shown when
24-hour time is selected)
Using the number keys, enter the Time in the
12-hour (or 24-hour) format. Press the down
arrow key <
↓> to modify the AM/PM setting.
Note: The flashing asterisk shows the current
data being edited.
To save changes, press the <ENTER> key
when finished editing.
Press the <CLEAR> key to cancel changes.
After setting the time you will need to set the date. If the date is already correct,
enter through the date and press <
ENTER > to send the time to the display.