Daktronics DF-4000 - Manual (Page 53)

Gas Price 7-7
Display Passcode
Detect Clients
Set Time
This allows you to set the time and date with the RC-100.
LCD Screen Action
Display
Passcode
Ent to Exit
Press the <ENTER> key to set or change the
passcode. Press <CLEAR> to exit the menu.
Display
Passcode
Old
code……………*
Display
Passcode
New
code……………*
Display
Passcode
Passcode set
If there was an old passcode, then that must
be entered first before entering a new code.
Enter the new four-digit passcode, and press
<ENTER>.
The LCD will show Passcode Set, if it was
successful.
If the <CLEAR> key is pressed and entered
during this process, the new passcode will not
be set.
LCD Screen Action
Detect
clients
Ent to
confirm
Clients
found 1
Is this
correct?
Press the <ENTER> key to detect the number
of client statuses on the system.
This is used so the send sequence key knows
how many clients there are for showing error
messages.
The LCD will show how many clients are
found. If the <YES> key is pressed, then that
is the number the console will use for showing
error messages if all expected clients did not
respond.