D-Link DFL-600 - Manual (Page 29)

DHCP Settings
DHCP (Dynamic Host Configuration Protocol) is a method of automatically
assigning IP addresses, subnet masks, default gateway and DNS server IP
address to computers on the LAN side of the DFL-600. The DFL-600 can be
a DHCP server for your LAN, assigning IP addresses, etc. to computers on
your network from a range of addresses you specify below.
DHCP Server Status This allows you to Enable or Disable the DHCP
Server feature on the DFL-600. The default is
Enabled.
Starting IP Address This is the first IP address in a range that the
DFL-600 will assign to a computer on your
network. This IP address can not be the same as
the IP address assigned to the DFL-600, nor can