Daktronics AF-3300-12-RGB/20-R - Manual (Page 26)

Electrical Installation
3.8 Signal Termination Between Displays (Primary –
Mirror)
Most displays are shipped as either a single Primary display
or two displays in a 2V, Primary-Mirror configuration.
Figure 18: Display Interconnect
The Primary - Mirror (2V) quick connect cable is used to
terminate signal between two displays. The six-foot cable
goes from the Signal OUT (J34) on the primary display to
Signal IN (J32) on the mirror display.
Figure 19: Quick Connect Cable
3.9 Optional Temperature Sensor Installation
If an optional temperature sensor will be used with this display, see Appendix B for
mounting and signal connections.
3-8