Daktronics Sportsound 500HD - Manual (Page 15)

Electrical Installation 9
Section 4: Electrical Installation
CAUTION – RISK OF ELECTRIC SHOCK: Only qualified individuals should perform power routing
and termination to the system. It is the responsibility of the electrical contractors to ensure that all
electrical work meets or exceeds local and national codes. Failure to follow installation guidelines will
result in audible noise on the sound system and possible damage to internal components.
Note: This product is not provided with mains disconnect. Customer shall provide disconnect at
base of sound system location that meets or exceeds local and national electrical codes.
4.1 Power/Signal Connections
Reference Drawings:
System Riser; 500HD............................................................................. Drawing C-980598
System Riser; Electrical & Audio Notes ................................................. Drawing B-985713
Schematic; Control Enclosure 500HD-Dual 120VAC .......................... Drawing B-1115742
Schematic; Control Enclosure 500HD-Single 120VAC ........................ Drawing B-1115872
Schematic; Control Enclosure 500HD-Dual 230VAC .......................... Drawing B-1115891
Schematic; Control Enclosure 500HD-Single 230VAC ........................ Drawing B-1115896
Drawing C-980598 in Appendix A details power and signal connections between the fiber
conversion box, control enclosure, and sound cabinet of the Sportsound 500HD sound system.
Refer to Figure 13 for component and connection locations within the control enclosure and
Drawings B-1115742,B-1115872, B-1115891 or B-1115896 for detailed wiring schematics.
Note: Use a flathead screwdriver to unlock the latch on the enclosure door. A padlock is
provided with the control enclosure that may need to be removed.
Figure 13: Control Enclosure Components & Connections (Covers Removed)