Daktronics Sportsound 500HD - Manual (Page 31)

TOP VIEW
FRONT VIEW
BOTTOM VIEW
RIGHT SIDE REAR VIEW
2'-7 3/8"
[796mm]
ISOMETRIC VIEW
FRONT "GRILLE" FRAME CAN BE REMOVED
FOR SPEAKER MESH RE-INSTALLATION.
(4) 3/8" HARDWARE SETS ON TOP &
(4) 3/8" HARDWARE SETS ON BTM
SECURE FRAME TO STEEL CABINET.
"GRILLE" FRAME 45 LBS. W/ MESH
2'-11 3/8"
[898mm]
PICK POINTS
0'-0 3/4"
[20mm]
DOOR
2'-9"
[839mm]
COPY AREA
7'-6" [2287mm]
PICK POINTS
8'-0" [2438mm]
OVERALL WIDTH
0'-1 1/2" [37mm]
BORDER
(2) REAR ACCESS DOORS FOR SERVICE
OF INTERNAL COMPONENTS IN CABINET.
DOORS CAN BE REMOVED BY TURNING
LATCHES WITH A STRAIGHT EDGE
SCREWDRIVER AND LIFTING DOOR
OFF OF BOTTOM CHANNEL.
1'-7"
[481mm]
WEIGHTS:
SS500HD-D: 850 LBS
SS500HD-SL: 775 LBS
SS500HD-SR: 775 LBS
ACOUSTICAL MESH "GRILLE"
ARTWORK TO BE APPROVED BY
CUSTOMER.
CONCEALED FASTENER 0.063"
ALUMINUM PANELS ATTACHED
ON SIDES AND BACK.
0.125" ALUMINUM
PANELS ATTACHED TO
TOP OF CABINET.
REFER TO DETAILED MOUNTING
DRAWING FOR MOUNTING AND
WELDING SPECIFICATIONS.
(4) 1/2" REMOVEABLE LIFT EYES.
WHEN POSSIBLE
USE A PROPERLY SIZED SPREADER BEAM
WHEN LIFTING SOUND SYSTEM.
ALIGN LIFT EYES TO BE INLINE WITH
CABLES.
3'-6" [1067mm]
NOTES:
1.0 REFERENCE
1.1 REFER TO DAKTRONICS DRAWING: 1561-E10C-982267 FOR
SPORTSOUND 500HD MOUNTING W/ POLE CLAMPED DISPLAYS.
1.2 REFER TO DAKTRONICS DRAWING:
1561-E10B-992088 FOR SIDE PANEL MOUNTING
DETAILS W/ SS500HD.
1.3 REFER TO DAKTRONICS DRAWING: 1561-E10B-992093 FOR
SPORTSOUND 500HD MOUNTING W/ STRINGER MOUNTED
DISPLAYS.
1.4 REFER TO DAKTRONICS RISER DIAGRAM FOR ALL
ELECTRICAL POWER AND DATA SPECIFICATIONS.
2.0 GENERAL NOTES
2.1 ALL DIMENSIONS ARE IN FEET AND INCHES.
2.2 REFER TO INSTALLATION AND MAINTENANCE MANUAL
FOR COMPLETE INSTALLATION INSTRUCTIONS.
3.0 SOUND CABINET NOTES
3.1 DAKTRONICS SOUND CABINET IS STEEL CONSTRUCTED
SKELETON WITH ALUMINUM PANELING FASTENED TO ITS
EXTERIOR.
3.2 LIFTING POINTS ARE PROVIDED BY DAKTRONICS. WHEN
SYSTEM.
3.3 PAINT COLOR:
SPEAKER CABINET COLOR: POWDER COAT BLACK.
4.0 STRUCTURAL NOTES
4.1 THE SPORTSOUND 500HD CABINET WILL WITHSTAND
A 150 MPH (3-SEC GUST) DESIGN WIND SPEED
WITH OVERALL DESIGN PRESSURE OF 78 PSF
ACCORDING TO ASCE 7-05 (EXPOSURE C).
4.2 THE DESIGN WIND PRESSURES WERE SHIFTED AND
ADJUSTED TO ACCOUNT FOR ASCE 7 PRESCRIBED OFFSET
EFFECTS.
4.3 THE SPORTSOUND CABINET HAS BEEN DESIGNED TO
SUPPORT A DESIGN ROOF SNOW LOAD OF 60 PSF.
4.4 ALL STRUCTURAL STEEL SHALL BE ASTM A36
(36 KSI) EXCEPT:
- WIDE FLANGE SHALL BE A992 (50 KSI) STEEL
- TUBING SHALL BE A500-B (46 KSI)
4.5 THE SPORTSOUND CABINET HAS BEEN DESIGNED TO
SUPPORT LATERAL SEISMIC LOADING EQAUL TO 2.0 TIMES
GRAVITY.
THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS
DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT
REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED
WRITTEN CONSENT OF DAKTRONICS, INC.
COPYRIGHT 2010 DAKTRONICS, INC.
DAKTRONICS, INC.
BH
DRAWN: DATE:
SHEET JOB NO: REV
DAKTRONICS AUDIO SYSTEMS - SPORTSOUND 500HD
ENGINEERING SPECIFICATION; SPORTSOUND 500HD
DTREML 22 MAR 10
P 1561 E 10 B
3/8" = 1'
DTREML
969776
03 001
DATE: REV BY:
01 12 JAN 10 JLR
UPDATED DRAWING PER
REAR ACCESS DOOR UPDATE
0'-2 3/8" [61mm]
DATE: REV BY:
02 7 JUN 11 MBJ
UPDATED TOP,FRONT,BOTTOM & RIGHT VIEWS
DATE: REV BY:
03 12 JUL 13 KCS
UPDATED 500HD VIEWS WITH NEW
LATCHES AND HANDEL
3'-6" [1077mm]
OVERALL W/O DOORS