Daktronics Data Manager (DDM) - Manual (Page 29)

Appendix A 23
Creating an Output Port
1. On the Document Actions task pane, click the Port Configuration button to open a
window to set up a port for transmitting data.
2. In the Port Configuration window, click Add to insert a new port, and then set up in the
following settings:
 Format: Leave this option set to ERTD.
 Name: Type in “Output Port”.
 Protocol: For this example, choose Udp.
 Suite: Leave this option blank
 Type: Leave this option set to Tx for transmitting data.
 Port: For this example, type in “21000”.
Note: When setting up a port, contact the network administrator to make sure these
settings are correct and do not interfere with the data ports of other Daktronics programs.
3. Click Ok when finished.