Daktronics Venus 7000 Controller Track - Manual (Page 9)

Venus
®
7000 Controller Track & Field Real Time Data
Daktronics, Inc. PO Box 5128, 331 32 nd Ave. Brooking, SD 57006 ED-12636 REV 1
www.daktronics.com tel (605) 697-4036 or (877) 697-1115 fax (605) 697-4444 e-mail: [email protected]
Page 9 of 10
STEP 4 Verify the Data Frame Parameters
Refer to Figure 18. These will need to be verified for
each frame. For the
Hy-Tek sequence, Input 1, frames 1,
2 and 5 will be set to hy track ln.itf and Frames 3 and 4
will be set to hy track scr.itf .
STEP 5
Start creating RTD fields
Pick the Frame Properties file tab, next select Field
Type: RTD. Now the RTD Field should display that
fields parameters. Click on the Field Name, choose the
desired information for that field. After entering each
RTD field and it’s respective parameters, the frame should
appear similar to Figure 19.
STEP 6 Additional Hy-Tek frames
The Hy-Tek sequence should consist of five frames: Start
List, Results List, Women’s Scores, Men’s Scores, and
Awards. Refer to Figure 19, Figure 20 and Figure 21 for
frame setup.
 NOTE: Women’s Score and Men’s Score frames are
duplicates. Once one frame is created, it can be copies to the
other frame.
Figure 18: Data Frame Parameters
Figure 19: Hy-Tek Frame 1
Figure 20: Hy-Tek Frames 2 and 5