Devolo MicroLink dLAN Ethernet - Manual (Page 12)

Connection and installation
|
| devolo MicroLink dLAN Ethernet - devolo MicroLink dLAN USB |
12
EN
2.2.2 MicroLink dLAN USB
The MicroLink dLAN USB adapter has three indicator lights (LEDs) and a USB
port:
b COL: Flashes faster as the network load increases.
b
ACT: Flashes when data is being sent or received over the electrical
lines.
b LNK: Steady when connected to power.
b
USB port: This is the connection point on the MicroLink dLAN USB
adapter for connecting it to a computer with the USB cable (included).
2.3 Installation
2.3.1 Connecting the MicroLink dLAN Ethernet adapter
Before connecting the dLAN adapter please note its security ID and keep it
available for configuration of the network. The security ID can be found on the
bottom of the dLAN adapter.
ቢ With the computer running connect the MicroLink dLAN Ethernet adapter
to an Ethernet port of the computer with the network cable (included).
ባ Plug the MicroLink dLAN Ethernet adapter into a convenient power
socket.