Dexaplan SL 614 / 614 B - Manual

 GB/IE  GB/IE
Operating and Safety Instructions
Introduction
Please read these operating instructions carefully to the end. They belong to this product
and contain important information on setting up and handling this device. It is important
that you always follow the safety instructions. If you should have any questions or are
not certain how to handle this device, please visit www.dexaplan.com on the Internet or
contact your service centre. Please keep these instructions in a safe place and pass
them on to anyone who uses this device.
Intended Use
The light controller is designed to switch lights on and off automatically in order to
make others believe you are at home, for example. It should only be used in private
households. If it is to be used outdoors, a weatherproof housing should be used for the
lamps. Any use of the device other than that described below, or any modification to the
device, is not permitted and may result in hazards such as injuries and technical
malfunctions (e.g. short-circuit, fire, electric shock) or damage.
Technical Data
Fitting type: B double-contact bayonet
Approved illuminants: Bulb, min. 40 W to max. 00 W (in the case of closed
lampshades max. 60 W) Energy-saving lamp, min. 7 W
to max. 3 W
Weight: approx. 50 g
Safety Instructions
If damage occurs as a result of non-compliance with these operating instructions, all
guarantee claims shall become invalid! No liability will be accepted for consequential
damage! The manufacturer will not accept responsibility for damage or injury to property or
individuals resulting from improper handling or non-compliance with the safety instructions!
c Danger! Non-compliance with these instructions places the user’s life or health in
danger.
m Caution! Non-compliance with these instructions places other items in danger.
c Danger!
• Before installing the device, please turn the power supply off. Ensure that the
lamp socket is not live during installation and that nobody can turn the power on
again while the device is being installed.
• It is important to ensure that there is sufficient safety clearance between the illu-
minant and other items. It is possible that when the device is fitted the clearance
to combustible materials such as lampshades etc. is reduced.
• Do not open the device. The voltage inside the device is high! Otherwise there is a
possibility of electric shock and a danger of death!
• Do not insert any objects into the socket or device, as otherwise you might touch
live parts! Danger of electric shock, fire or death!
• It is essential to ensure that the device does not come into contact with water or
moisture. Otherwise there is a danger of electric shock, fire or death!
• The device should only be cleaned with a dry or slightly damp cloth, keeping the
bayonet cap and socket dry. Otherwise there is a danger of electric shock or death.
• The device should not be left in the hands of children. It is not a toy. Otherwise
there is a danger of death!
• Do not leave the packaging material lying around. Plastic parts etc. might become
a dangerous toy for children. There is a danger of death through suffocation!
m Caution!
• Please avoid exposing the device to the following:
- strong mechanical stresses
- extreme temperatures
- strong vibrations
- strong magnetic or electric fields
• Do not open the device. Maintenance is not necessary and repairs are not possible.
Fields of Application and Function
The light controller could help to deter burglars by indicating that you are at home by
switching lights on and off automatically.
To this purpose the light controller is screwed into the lamp socket and afterwards the
illuminant into the light controller.
Two types of simulation are possible:
o Dusk to dawn switch: When it becomes dark outside the light switches on auto-
matically (after a short delay) and switches off again at daybreak.
o Random switch: The random generator switches the light on and off automati-
cally during the night at irregular intervals.
The light can be switched on and off normally.
Installation
Q Lamp socket
W Bayonet cap
E Light controller
R Bayonet socket
T Bulb
Requirements
The light controller should be used with a light socket with a bayonet socket and an ap-
propriate illuminant which also has a bayonet cap.
Appropriate Illuminants:
o Bulb, min. 40 W to max. 00 W (in the case of closed lampshades max. 60 W)
o Energy-saving lamp, min. 7 W to max. 3 W
The following illuminants should not be used:
o Lamps controlled by a dimmer switch
o Lights recessed into the ceiling, flicker and glow lamps
Q
W
E
R
T
Light Controller SL 64 B Dexaplan
T
3
KOE30_T32_Content.indd 1-2 30.10.2006 15:56:21 Uhr