DFI COM100-B - Manual (Page 15)

www.dfi.com Chapter 2 Hardware Installation
15
Chapter 2
Rear Panel I/O Ports
The rear panel I/O ports consist of the following:
• 5V~19V DC-in jack
• 2 Serial COM ports
• 1 DisplayPort
• 1 LAN port
• 2 USB 3.0 ports
• 4 USB 2.0 ports
• Line-in/Surround, Line-out and Mic-in/Center+Subwoofer jacks
USB 3.0
0-1
COM 2
Line-out
COM 1
DisplayPort
LAN
DC-in jack
USB 2.0
2-5
Mic-in/
Center+Subwoofer
Line-in/Surround
This jack provides maximum of 60W power and is considered a low power solution. Connect
a DC power cord to this jack. Use a power adapter with 19V DC output voltage. Using a volt-
age higher than the recommended one may fail to boot the system or cause damage to the
system board.
5V~19V DC-in
DC-in
COM1
COM2
I C
COM2
COM1