DFI OT951-D series - Manual (Page 16)

16
2
Hardware Installation
System Memory
Important:
Electrostatic discharge (ESD) can damage your system board, processor,
disk drives, add-in boards, and other components. Perform the upgrade
instruction procedures described at an ESD workstation only. If such a
station is not available, you can provide some ESD protection by wearing
an antistatic wrist strap and attaching it to a metal part of the system
chassis. If a wrist strap is unavailable, establish and maintain contact
with the system chassis throughout any procedures requiring ESD pro-
tection.
DDR3
Features
• One 204-pin DDR3 SODIMM socket
• Supports 1066/1333MHz DDR3 SDRAM
• Singal channel memory interface
• Supports maximum of 8GB system memory