DFI BT101 - Manual (Page 17)

www.dfi .com
17
Chapter 2 Hardware Installation
Chapter 2
COM 1 RS232/Power Select
1-3 (RI), 2-4 (DCD) On:
RS232 (default)
3-5 (+5V), 4-6 (+12V) On:
RS232 with power
JP14 is used to configure the Serial COM port 1 to pure RS232 or RS232 with power.
6 4 2
5 3 1
6 4 2
5 3 1
JP14
2
1 9
COM 1:
RS232/422/485
SATA DOM Power Select
2-3 On: +5V
Note:
SATA port 0 provides adequate space for SATA DOM.
JP12 is used to select the power level of SATA DOM.
1-2 On: GND (default)
1 3 2
1 3 2
JP12
SATA 0