Dish Network 6.4 - Manual (Page 26)

14
S ETTING U P A TV1 UHF P RO R EMOTE FOR THE
D UO DVR 522 AND D UO DVR 625 O NLY
Use these special instructions only if you are going to use the green 1
UHF Pro key to control the TV1 side of your DuoDVR 522 or 625
(also known as DISH Player-DVR 522 or 625).
When you are finished setting up the remote control, you’ll be able to
operate the TV1 side of your DuoDVR 522 or DuoDVR 625 from long
distances.
1 Make sure the key is installed as described on pages
S-1 and S-2.
2 Make sure the UHF Antenna is attached to the
R
EMOTE A NTENNA input on the back of the receiver.
3 Using the receiver’s front panel buttons, press MENU. Select the
following on-screen items in this sequence:
a. System Setup
b. Installation
c. TV1 UHF Pro Setup
4 Select Enable from the TV1 UHF Pro Setup screen.
5 Select System Info to open the System Info screen.