Digi-Star EZ4300 - Manual (Page 17)

Operators Manual
D3655 13
Re-use Recipe and Pen Data
To re-use the recipe and pen data in the EZ4300:
Press [Off] to turn power off,
Press and hold [Clear].
Press [On], and continue holding [Clear] until the EZ4300 displays: “ " " ”.
Release [Clear] and press [Clear] again to re-use the recipe and pen data.
The scale will then continue to power up as normal.
Note: When you re-use the data stored in the EZ4300, it will take the recipe and pen
information and remove the completed weights loaded or unloaded and mark
them as undone.
It will not accumulate the data from day to day. Download the data on to the
Datakey before re-using the recipe and pen data stored in the EZ4300.
Add a Pen or Pen List
This option is used when a pen is not in the current pen list in the EZ4300.
Enter the pen name or number on the keypad and press [Pens].
Press [On] or [Enter] to add this pen.
The display will then show:
The upper display and
“line 1” will show the
selected recipe for the
pen. Line 2 and 3 are
the next recipes in the
recipe list.
Press [Enter] to select the desired recipe.
Enter the amount to be unloaded to the pen using the keypad.
Press [Enter].
Enter the number of animals in the pen using the keypad.
Press [Enter].
The EZ4300 will enter the pen-unloading mode.