DNF Controls 4000CL-TO - Manual (Page 12)

12 4000CL-TO, 400 Clip Fast Access System, PinnacleThunder Protocoll
b. VIEW THE IN (OUT) POINT
1)
When the IN (OUT) indicator is on,
press [IN] ([OUT]) to view the existing IN (OUT) Point.
2)
While viewing the IN (OUT) Point:
Press [MARK] to overwrite the saved time with the current time.
Press [RECUE] to search to the IN (OUT) point.
c. CLEAR THE IN (OUT) POINT
1)
Press and hold [DEL].
2)
Press and release [IN] ([OUT]). The IN (OUT) indicator will turn off.
d. ENTER PREROLL VALUE
1) Press
[MENU]. The MENU indicator will turn on.
2)
Turn the Wheel until “Enter PREROLL:” is shown on the display.
3)
Enter the desired preroll value using the ST300’s numeric keypad.
4) Press
[ENTER] to save the entered value.
OR
Press [ESC] to exit without saving.