DNF Controls 4000CL-TO - Manual (Page 17)

17 4000CL-TO, 400 Clip Fast Access System, PinnacleThunder Protocoll
ST300 SETUP
Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.
Press Softkey [YES] when asked “Are You Sure?”
Press Softkey beneath SetDefault to set ST300 to default settings.
Press Softkey [YES] when asked “Are You Sure?”
DISPLAY
SOFTWARE
VERSION
The version number for the currently installed software is displayed.
SHOTBOX ON/OFF Enables use of Shotbox.
RECORD Press Softkey to select single button or 2-button record.
RECORD = [REC] Only OR [REC] + [PLAY]
PREROLL Enter Preroll value.
TRANSMIT
CUELIST Transmits Cuelist to another ST300 or to a PC
RECEIVE CUELIST Receives Cuelist from another ST300 or a PC
ST300 SETUP
Clear Cues SetDefault