Unpacking the machine, Opening the shipping carton – DR Power Walk-Behind 6.5 (Pre-August 2010) User Manual

Page 17

Advertising
background image

CALL

TOLL-FREE

1-800-DR-OWNER 13

Unpacking the Machine

Your

DR WALK-BEHIND LEAF & LAWN VACUUM

shipped in one carton, completely assembled.

Items Supplied in Shipping Carton:

DR WALK-BEHIND LEAF & LAWN VACUUM

Safety

&

Operating Instructions Manual

Briggs and Stratton Engine Manual

Opening the Shipping Carton

Tool Needed:

Pliers

Box Cutter



STABILIZE THE SHIPPING CONTAINER ON A FLAT SURFACE BEFORE ATTEMPTING TO UNPACK THE
MACHINE.

1. Using Pliers, carefully remove the staples from the top of

the shipping carton and open the top (Figure 2). Be careful
of the staples; they are sharp.

2. Remove the Protective Packing Material (Figure 2).

3. Remove any accessories and the corrugated divider from

the center of the carton (Figure 3).

4. Cut the cardboard top to bottom in the seams at the front

of the carton and fold it down (Figure 4).

5. Grasp the Control Handle and roll the machine from the

shipping carton (Figure 5).

6. Do not discard your packaging material until you are fully

satisfied with your new DR WALK-BEHIND LEAF & LAWN
VACUUM.

Figure 3

Figure 2

Figure 4

Figure 5

Protective

Packing

Material

Advertising
This manual is related to the following products: