DR Power 27589 Tray Kit User Manual
Page 2
7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2011 Country Home Products, Inc. All rights reserved
275911
5. Position the Tray onto the mounting holes of the Frame and loosely reinstall
the four rear Bolts and Locknuts into the Tray and Frame (Figure 4).
6. Position the Support Leg and install the four front Bolts and Lock Washers
through the Tray, Frame and Leg. Tighten all Tray hardware using two 9\16"
Wrenches
7. Install the Handles on the two center ribs of the front of the Tray with the
Bolts and Locknuts using two 9\16" Wrenches (Figure 5). Rotate the
Handles up and secure with the Pins.
8. Remove the Sawhorse and Wheel Chocks from the machine.
If you have any questions please contact us at www.DRpower.com or call 1-800-
DR-OWNER (376-9637) for assistance.
You will need another person to position the Tray. The Tray weighs over
60lbs. and lifting alone may cause injury.
Support
Leg
Figure 4
Tray
Hardware
Tray
Figure 5
Handles
Hardware
Pins