Digi W R 4 4 V 2 - Manual (Page 17)

TransPort® WR44v2 Installation Guide
Page 17
The Quick Start Wizard is located in the Getting Started section on the Home menu.
4.2.1 Cellular: CDMA
If your unit is to be used on a CDMA network, the embedded module must be provisioned on the network
before it can make a connection.
Note: If your unit uses a Gobi module (indicated by a model number of WR44-U5xx-xxx-xx), and you did not
select the appropriate CDMA carrier via the Quick Start Wizard, you must run the GOBI Module Carrier Wizard
before provisioning can be successfully completed.
To provision the CDMA mobile device, navigate to the CDMA Provisioning section by clicking on Network >
Mobile > CDMA Provisioning.