Rapid resume logic, Programming options – Directed Electronics Security System and Convenience 125xv User Manual

Page 29

Advertising
background image

25

©

2004 Directed Electronics, Inc.

Rapid Resume Logic

This Directed Electronics system will store its current state to non-

volatile memory. If power is lost and then reconnected the system

will recall the stored state from memory. This means if the unit is

in Valet

®

Mode and the battery is disconnected for any reason,

such as servicing the car, when the battery is reconnected the unit

will still be in Valet Mode. This applies to all states of the system

including arm, disarm, VRS

®

, and Valet Mode.

Programming Options

Programming options control your system's normal, operational

set-up. Most options do not require additional parts, but some may

require additional installation labor. This system's programming

options are listed below, with the factory default settings in bold:

12, 24, or 60 minute run time. Your system can be pro-

grammed to allow the vehicle to run for 12, 24, or 60 min-

utes when remote started or in Timer Mode.

■ Parking lights flashing or constant. Your system can be pro-

grammed to either flash or to turn on the parking lights con-

stantly during the entire remote start operation.

Advertising