ESI Juli@ User Manual
Page 12
ESI
Juli@
12
To avoid possible static shock damage to the computer parts, discharge it by touching the computer
case or something grounded. We recommend you use an anti-static device such as an anti-static
wristband.
When holding the Juli@ card, touch only the guide or the edge of card. Do not grab the card by the
board or connector.
PCI Card Installation
Find an empty PCI slot on the motherboard
Typical PC Motherboard Slot Configuration
Removing the PCI Slot faceplate
If the PCI slot is covered by a faceplate, you can remove it by removing the screw holding it in
place or by prying it off with a screwdriver.
Insert the Juli@ card into the PCI slot, firmly pushing the card into the slot until it is seated
securely. Replace the screw, and tighten it.