ESI Juli@ User Manual

Page 15

Advertising
background image

ESI

Juli@

15

Windows will now prompt you to confirm the Windows Logo testing in the Hardware Installation
dialog with Continue Anway before the driver installation proceeds. After some time, the
installation of the ESI Juli@ Controller device will be completed and you need to click Finish.

Once this is done, the Found New Hardware Wizard will automatically appear again. Please follow
the exact steps one more time, this time to install the ESI Juli@ Audio device. After that is finally
confirmed on the last dialog via Finish, the Juli@ driver software has been completely installed. To
confirm this, please check if the ESI icon is displayed in the taskbar notification area as shown
below.

If yes, the driver installation has been completed successfully. Note that on some systems the
computer has to be rebooted (Windows will display a message in that case) before everything is
completed.

Windows Vista & 7

Turn on your computer. Windows will automatically detect a new device installation and the Found
New Hardware
window will appear as seen on the following picture.

Select Locate and install driver software (recommended). Insert the driver CD only if you are
installing the original driver from the CD. If you are installing an updated driver from our website,
proceed by clicking on I don’t have the disc. Show me other options. on the following dialog.

Advertising