ESI Juli@ XTe - Manual (Page 22)

ESI Juli@ XTe
22
work in some versions of Windows – in that case, the sample rate is selected from inside your audio
application.
Clock Select
Selects the digital clock source for the Juli@ XTe.
(INT): Selects Juli@ XTe’s internal clock, which becomes the master clock. This mode must be
selected when Juli@ XTe is used alone or any other digital device is configured as slave device.
(EXT): Selects the digital clock or audio data from an external device as the clock source. The
external device will be set as the Master device and the Juli@ XTe will be set and operate as the
Slave device.
* In the EXT clock mode, Juli@ XTe can detect the external clock automatically. If the external
clock is not correct, the Console displays the message ‘Out Of Range’ like shown below.
DirectWIRE
What is DirectWIRE?
DirectWIRE is a driver technology, developed by ESI, which can be used for routing audio streams
internally within applications using EWDM Audio MIDI Drivers exclusively developed by ESI.
With the DirectWIRE router, an application can record from other application’s audio outputs
without external wiring or any loss of data when they are running at the same time.
DirectWIRE also allows you to easily rip any audio stream in real time by transferring data thru
DirectWIRE from MP3s, live On-line Broadcast and On-demand content, and more.
DirectWIRE is not available under Mac OS X.
DirectWIRE Panel
Click on DirectWIRE on the Juli@ XTe control panel. The DirectWIRE dialog as shown below will
appear. DirectWIRE digital virtual wiring technology, developed by ESI, routes audio streams
internally within applications using standard audio drivers such as WDM, ASIO and MME, even
when they are running at the same time.