ESI MAYA44 USB - Manual (Page 10)

ESI MAYA44 USB
1. Monitor Level Control Section
This section can be used to control the input monitor level. You can monitor the signals through the
input channel 1,2 and input channel 3,4 individually and/or simultaneously. It will not affect the
actual input level from the source. Even if these faders are muted, you can still record the signals
from the source, but you are not able to listen to (= monitor) the input source through the analog
output.
2. Input Level Control Section
This section controls the real input level through the input ports. You can control all 4 inputs using
the one set of the stereo faders.
3. Output Level Control Section
These are the master output level faders. You can control all the outputs using the single set of the
stereo master fader, except the digital optical output. You can control the monitoring level of the
input source through the input ports and/or the playing out level of the wave file through the analog
output ports.
Please note that the headphone output signal is the mixed signal from analog out 1, 2 and analog out
3, 4. Please also note that the analog headphone output and the digital optical output share the same
connector, i.e. they cannot be used simultaneously.
The Gang mode links the left and right faders of each channel together for easier stereo operation.
Deselect Gang if you need to control the left and right levels independently.
Block Diagram
10