ESI U46 XL - Manual (Page 9)

U46 XL ESI
9
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you will see a Windows Security
dialog box once or several times that asks you for confirmation to install the driver software.
Confirm any such dialog with Install.
You will now be prompted to connect and switch on the hardware on the next dialog that is shown
below on the left. Plug in U46 XL and switch it on. Do not click Next yet. Instead, wait a few
seconds for the automatic device driver installation. You can monitor this in the task notification
area where Windows Vista informs that the driver is installed via a bubble message box.
You can now finally click Next on the ESI U46 Audio Driver Setup dialog. The installation is now
finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification area as
shown below.
If yes, the driver installation has been completed successfully.