ESI nEar04 - Manual (Page 7)

ESI nEar04
- S/N Ratio: below full output, 20 kHz Bandwidth > 100dB
- Input Connectors: 2 x TRS Balanced/ Unbalanced Input Connectors (L/R)
- Polarity: Positive signal at + input produce outward LF cone displacement
- Input Impedance:
k ohms balanced, 10k ohms unbalanced 20
- Input Sensitivity: 200 mV input produces full output with Volume control at
- Protection: RF interference, output current limiting, over temperature,
maximum.
turn-on/off transient, subsonic filter, external mains fuse.
- Indicator: Power ON/OFF indicator on front panel
- Power Requirements: Factory programmed for either 115V ~50/60Hz, or
230V~50/60Hz power via detachable 3 circuit line cord.
- Cabinet: vinyl laminated MDF
- Dimension: 206mm(H) x 136mm(W) x 149mm(D)
Block Diagram
7