ESI Rekord M - Manual (Page 6)

ESI Rekord M
6
A. USB connection cable, this cable is used to connect Rekord M to your PC or Macintosh and to
charge the battery. Simply connect it to the computer and the internal battery of Rekord M gets
charged automatically.
B. microphone input adapter, this adapter from 1/8" to 1/4" is used to connect an external dynamic
microphone (mono) to Rekord M. Note that recording from condenser microphones is not
possible.
C. hand strap, allows you to conveniently hold Rekord M on your arm wrist or anywhere else. The
strap connects to the small holder on the top backside of Rekord M.
D. line input adapter, allows you to record from line input signals in stereo. It connects two
unbalanced 1/4" line signals (for left & right channel) to the 1/4" line input of Rekord M.
LCD display
1. shows the current input source for recording: INT (internal stereo microphone), WIDE (internal
stereo microphone with higher sensitivity for wider rooms / areas), EXT (external mono
dynamic microphone) or LINE (external stereo line input).
2. shows the current selected folder for recording & playback (A, B, C, D or E – 5 in total).
3. shows the current repeat mode for playback (Normal, One Repeat, Dir Repeat, All Repeat,
Shuffle All).
4. shows if the key lock is enabled (lock icon) or disabled (empty, default).
5. shows the battery charge level.
6. shows the selected MP3 bitrate and/or PCM status: PCM (no compression, direct WAV file
recording), SHQ (128kbps mp3), HQ (64kbps mp3), SP (32kbps mp3) or LP (16kbps mp3).