ETA Promise - Manual (Page 19)

– When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
– After finishing work and before cleaning, always switch off the appliance and disconnect it
from power supply by taking the power cord connector out of the electric socket.
– Do not use the appliance in connection with a programmer, a timer or any other appliance
that switches the appliance on automatically.
– This appliance is not intended for outdoor use.
– Before preparation, remove possible packages from food (e.g. paper, a PE bag, etc.).
– It is not allowed to modify the surface of the appliance in any way (e.g. using
a selfadhesive wallpaper, foils, etc.).
– Never leave the appliance running unattended and keep checking it from time to time
throughout the food processing time!
– Make sure that hair or loose clothes do not get into the accessories to avoid risk of them
tangling into the mixing blade.
– Never immerse the drive unit into water or wash it in running water!
– Do not switch on the appliance without substances put in!
– Always use the mixer with the stand only in the operating position and in places where
there is no risk of it tipping over. Never use the appliance near sources of heat (such as
the stove, electric or gas ring, etc.) or wet surfaces (such as wash basins, kitchen
sinks, etc.).
– In case you are going to process hot liquid (mixing a hot soup with vegetables etc.), be
careful because it may spurt out of the container because of sudden boil.
– Use the appliance designed for this type only. Using another appliance can represent
a risk for the operator.
– Do not leave the appliance in operation without supervision and load!
– If the propulsion unit is operating, do not remove the accessories (e.g. whisks, hooks,
blender), bowl, lid and do not fold out the arm of the stand!
– Take care that the cord never got in the way of the rotating tools.
– Working attachments can not be replaced during operation of the propulsion unit due to
safety.
– Each time before plugging the appliance in the mains check whether the appliance
master switch is in the OFF position ‘0’ and after finishing your work always unplug the
appliance off the mains.
– Wash all parts which will come in touch with food before first use.
– Use the appliance only in its working position and at places where there is no risk of
tipping and in sufficient distance from heat sources (e.g. heater, stove, cooker, grill etc.)
and wet surfaces ( sinks, basins etc.)
– Use the appliance only with accessory intended for this type of device. Using other
accessory may pose danger for the user.
– Do not insert the accessories in any bodily orifices.
– Do not turn on the appliance without ingredients inserted!
– Do not remove the accessories if the propulsion unit is in operation!
– Before removing accessories or propulsion unit from the dish, let the rotating part
stop.
– Do not process food at temperature exceeding about 80 °C.
– Never insert e.g. fingers, fork, knife, spatula or spoon into the rotating parts of the
appliance and the accessories.
– Turn the device off and unplug from the power source by pulling the plug out of the socket
before replacing any attachments or accessible parts which are moving during operation
(before installing or unistalling, before cleaning or maintenance).
19
GB
/ 38