ETA Promise - Manual (Page 20)

– Always unplug the appliance from the power source when left unattended.
– Do not let children use the appliance without supervision!
– Make sure the whisks do not hit the walls of the utensils during operation or do not get
stuck in the thick matter or frozen ingredients.
– If the processed ingredients start to stick on the accessory (e.g. the whisks, hooks,
blender knife, lid or the dish), turn the appliance off and clean the accessory carefully
with a spatula.
– Make sure that the accessory does not hit the walls of the dishes hard or that it does not
get stuck in the thick matter or frozen ingredients when working with the mixer.
– Never immerse the propulsion unit in water or wash it with flow of water.
– Check the condition of the power cord of the appliance regularly.
– Make sure that the power cord does not hang over the edge of the working table where
children could reach it.
– Do not wind the power cord around the appliance; this will extend its life.
– The cord must never be damaged with any sharp or hot object, by contact with flame or
water.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– Never use the appliance for other than its designed purpose as outlined in this instruction
for use!
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance and the accessories (e.g. food deterioration, injury by knife edge,
fire, etc.) and its guarantee does not cover the appliance in the case of failure to comply
with the safety warnings above.
II. Features of the device (pic. 1)
The basic version of the mixer 0046 includes propulsion unit, blending whisks, kneading
hooks. The extended version of the mixer 1046 includes an submersible blender and
accessory holder which serves for storing the propulsion unit and working attachments.
The deluxe version of the mixer 2046 is extended by a stand with a turning bowl, a lid and
a spatula.
A – propulsion unit
A1 – release button A4 – openings for connecting accessory
A2 – speed selector A5 – sliding cover (for closing the blender, if it is not in use)
A3 – MAX button A6 – supply cord
B – stand
B1 – fold-out bracket
B2 – bracket arrest button
B3 – mixer arrest button
C – lid
C1 – feeding opening cover
D – turning bowl
E – mixing whisks
F – kneading hooks
G – submersible blender
H – holder
I – spatula
20
GB
/ 38