ETA Bublimo - Manual (Page 27)

Wash all accessories (PET bottle and cap) in warm water (max 40 °C) with soap (or
suitable disinfecting agent) immediately after use and rinse with pure drinking water.
Do not install the cap on the bottle if you are not going to make another drink right away.
Store the bottle and the cap separately so that they can dry well. Some food can colour the
accessories in some way. However, this does not affect the function of the appliance and
it is not a reason for a claim. This colouring usually disappears after some time. Never dry
plastic mouldings over a heat source (e.g. heater,electric/gasstove).
GasketReplacement
By means of a suitable tool (e.g. a narrow screwdriver, needle), remove the gasket from
the holder A8. Put the new, spare gasket A9 back so that it fits in the groove in the holder
along the entire perimeter.
Storage
Store the appliance on a dry place, out of reach of children and persons sui juris.
ATTENTION
– Make sure that the contact areas and sealing elements are clean and functional.
– The drainage outlets A5 must be passable; do not adjust it in any way (e.g. by capping).
!
VII. ENVIRONMENT
If the size of the appliance allows, all the parts contain marking of the materials used for
production packaging, components and accessories as well as for recycling. The symbols
on the product or in the accompanying documentation mean that the product used must
not be liquidated together with communal waste. To ensure the appropriate liquidation take
the used appliance to a collection point where it will be accepted free of charge. Correct
liquidation of the product helps to protect valuable natural resources and helps to prevent
a potential negative impact on the environment and human health which can be the
outcome of inappropriate liquidation of waste. More details can be obtained from your local
authorities or the closest collection point. Inappropriate manipulation of such waste can
result in a fine according to the national legislation.
Maintenanceofaseriousnatureormaintenancewhichrequiresinterferencewith
theinternalpartsoftheappliancemustbecarriedoutbyaprofessionalservice
centre!Byfailingtofollowtheinstructionsissuedbythemanufacturer,theright
tothewarrantyservicewillbeinvalidated!
VIII. TECHNICAL DATA
Bottle capacity up to the MAX level (l) 0.9
Approx weight of the appliance (kg) 1.2
Dimensions of the appliance (mm) 130 x 150 x 460
Max operating pressure (Bar / Psi) 10 / 145
Max operating temperature ( o C / o F) 40 / 104
GB
27 / 45