Dual XDVD8181 - Manual (Page 27)

XDVD8181 OPERATION
7
XDVD8181 OPERATION
System SCREEN Setup - Touch Screen Calibration
On occasion the touch screen will
have to be calibrated, follow these
few steps as described
Step 1
Step 2
Step 3 & 4
Step 5 & 6
1) Touch top left corner of screen
) Touch SCREEN setup button
3) Touch NO in TS Calibration row
4) Then press YES
5) Touch and hold the pointers as indicated on the screen for  seconds each.
6) Screen will automatically return to MAIN MENU, touch EXIT to return.
L
L
L L
3 4
1
2
L
7
Note: For proper calibration
you must touch each pointer for
2 seconds. If pointers are not
touched properly, the calibration
sequence will start over until the
calibration is done correctly.