Fire Magic 1D-S0 Bar Caddy User Manual

Bar caddy, Installation instructions, Slide-in model #1d-s0

Advertising
background image

1

L-C2-164

REV 4 - 1405290830

12"

HEIGHT

15"

WIDTH

23 3/4”

DEPTH

BAR CADDY

INSTALLATION INSTRUCTIONS

Robert H. Peterson Co. • 14724 East Proctor Avenue, • City of Industry, CA 91746

INSTALLATION OPENING:

Front to Back Depth 22-3/4 "

Width 14-1/4", Height 12"

SLIDE-IN MODEL #1D-S0

Shown with cover in place and

optional trim kit (part #3807)

1. 1D-S-05 Drawer (1)
2. 1D-S-09 Splash pan 21"x 13"x 6" (1)
3. 1D-S-06 Cover (1)
4. 1D-S-03 Condiment/bottle holder (with cap) (2)
5. 1D-S-08 Condiment/bottle holder cap (2)
6. 1D-S-04 Insulation (not shown) (5)

BEFORE INSTALLATION, CHECK

THAT YOU HAVE ALL OF THE

PARTS AS LISTED TO THE RIGHT.

Before installation, ensure the opening dimensions
are correct (Fig. 1). Then simply slide the bar caddy
assembly into place in the cut-out area. Place the 5
pieces of insulation inside the caddy, on the bottom
and against the sides. Place the splash pan inside
the caddy, and put the caddy top and cover in place.
Insert the holder pans and their pan lids.
It is now ready for use.

TO USE AS A FOOD WARMER, SEE REVERSE.

Fig. 1.

Cut out dimensions for bar caddy

NOTICE TO INSTALLER: Please leave these instructions with the consumer.
NOTICE TO CONSUMER: Please retain for future reference.

Improper installation, adjustment, alteration, service

or maintenance can cause injury or property damage.

Refer to this manual. For assistance or additional

information consult a qualifi ed, professional installer

or service agency.

WARNING

14 1/4"

width

12"

height

22 3/4"

depth

Advertising