Fire Magic 24180-12 Aurora Digital Thermometer - Manual (Page 2)

REV 0 - 1311131105 L-C2-394 2
OPERATION
Your grill comes with a digital thermometer for oven and
meat probe temperature monitoring, and timed cooking.
Pressing the power button will turn on the thermometer. The
thermometer will automatically shut off after 5 minutes if no
temperature change is detected.
The thermometer is located on the control panel between
the control knobs.
Plug in the meat probe on the right side of the control panel
as shown in Fig. 2-1. The thermometer battery access drawer
is also located there, see Fig. 2-2 (if applicable, only on
certain models).
FOR BEST PERFORMANCE, GENTLY PRESS THE
BUTTONS. When turned on, accurate temperature readings
will begin after the thermometer has initialized. When turned
off, allow 5 seconds prior to turning back on.
Read the following sections completely regarding
thermometer operation. Refer to Fig. 2-3 for thermometer
orientation and button locations.
DEFAULT SCREEN
Press the power button to turn the thermometer ON. The
default screen will be displayed. Temperatures for the oven
and meat probe will be shown (Fig. 2-4). See below for options
under the default screen.
Setting a Location Temperature
1. Press the up/down arrow to switch to the desired location
(oven or meat probe). Press SET.
2. The selected location’s temperature screen will be
displayed. Use the arrows to set the desired temp. The
actual temp. will also be shown. (See Fig. 2-5.)
Note: PRESSING the arrows will adjust the desired
temp. by increments of one degree. HOLDING
them down (for several seconds) will adjust the
temp. rapidly.
3. Press SET to return to the default screen. Repeat as
necessary for other location.
The alarm will sound (if set to do so) when the oven / meat
probe reaches its set temperature. The alarm is silenced by
pressing any button on the thermometer.
MENU SET
®
Fig. 2-3 Orientation
Arrows for
adjusting digits
SET button
for selecting &
confi rming
Display screen
Timer
button
Menu
button
MENU SET
®
078
080
170
350
TEMP SET ACT
°F
MEAT
OVEN
TIMER 00:00
Fig. 2-4 Default screen detail
Time set via Timer
Meat probe
temp. info
Oven temp.
info
MENU SET
®
OVEN
ACTUAL: 078
SET TEMP: 350
Fig. 2-5 Location temp. screen (oven shown)
Current location
Set this temp. as desired
Fig. 2-1 Meat probe detail
MEAT
PROBE
Meat probe handle
Meat probe plug
Power
button
Use arrows
to set
Fig. 2-2 Battery access (if applicable)