Fli Audio FI4-F3 - Manual (Page 2)

2
OWNERS MANUAL
CAUTION
Congratulations on purchasing your FLI speakers. Please read this manual in order to fully
understand how to get the best results from this product and ensure that all advice on how to look
after the product is followed.
Thank you for buying FLI, we hope you enjoy listening to your product as much as we enjoyed
creating it.
DO NOT EXPOSE THIS PRODUCT TO DAMP OR MOISTURE - doing so may result in fire, shock
or damage to the product.
BEFORE WIRING DISCONNECT THE CABLE FROM THE POSITIVE BATTERY TERMINAL -
failure to do so may result in electric shock or injury.
ENSURE GOOD AND CORRECT CONNECTIONS - failure to make the correct connections may
result in fire or damage to the product.
DO NOT USE ANY FUNCTIONS OF THIS EQUIPMENT THAT MAY TAKE YOUR CONCENTRA-
TION AWAY FROM DRIVING YOUR VEHICLE - do not set up your amplifier whilst driving, doing so
may result in an accident. For prolonged setting up, make sure that your vehicle is stationary and in
a safe location.
KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do
this may result in an accident. FLI equipment is capable of producing sound levels that can perma-
nently damage your hearing. FLI recommends caution when listening at high volume. For safe and
enjoyable listening the sound should be comfortable and clear without distortion.
CAUTION
Never connect any speaker lead to the car chassis. This can cause severe damage to your speaker
/car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.
Use caution when working near the fuel / hydraulic lines and electrical wiring.
Observe the correct polarity when wiring, improper phasing may cause a loss of bass response.
Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or window
glass inside the door)
INSTALLATION
• The quality of the installation will affect the system performance and reliability.
• Contact your nearest authorised FLI dealer if you are unsure about the installation of this product.
• Please mount this unit away from any potential hazards.
• Minimising the length of wires will provide higher audio output from the system.
• The speaker should be securely fastened to the mounting position using the screws provided.
• Pre drill your mounting holes using a drill and position with the template provided.
• Be sure to investigate your mounting area thoroughly for electrical wires, brake or fuel lines or fuel
tank to prevent causing any damage.