Fli Audio FI4-F3 - Manual (Page 4)

4
SPEAKER INSTALLATION GUIDELINES
Firstly, make sure that the speakers will fit in your chosen location. This may involve the removal of the
standard vehicle speakers. Please use the mounting depth and hole cut dimensions as detailed in this
manual for guidance.
• If necessary cut any material away to allow the speaker to sit correctly.
• Cut out the mounting hole and pre-drill any other fixing holes.
• Screw through both gasket and speaker until the speaker is securely fastened.
SPEAKER INSTALLATION
Using the template provided find a suitable mounting location for the speaker.
Mark the mounting holes and pre drill the fixing hole with a 2mm drill bit. If the grill is too be fitted then
place it over the speaker and screw through both the grill and the speaker using the provided screws.
Be careful not to over tighten the screws as it may cause damage to the grill.