Dell PowerEdge 4220 - Manual (Page 18)

16
Installation Guide
Figure 1-6. Removing the Front-Door Hinges
c Remove the hinge spring from the hinge body.
d Place the hinge pin, retention clip, and spring in a safe location.
e Using the 4-mm Allen wrench, remove the Allen bolts that secure
the hinge body to the rack, and place the bolts with the hinge pin,
retention clip, and body spring.
f Rotate the hinge body 180 degrees so that the hinge-pin holes are now
on the right side of the hinge body (see Figure 1-7).
1 hinge pin 2 top hinge body
3 bottom hinge 4 hinge post
5 retention clip 6 body spring
1
6
5
2
3
4